DNYKER Hitch Bike Rack
Our DNYKER hitch bike rack transforms road trips and weekend adventures by carrying up to four bikes with rock-solid stability. Engineered with heavy-duty steel and a powder-coated finish, this rack mounts to standard 2-inch hitch receivers and holds bikes weighing up to 165 pounds combined.
We designed the tilt-away feature so you can access your trunk or rear hatch without removing bikes—just pull the lever and tilt the entire rack back. Padded cradles protect your bike frames from scratches, while adjustable wheel holders accommodate different tire sizes from road bikes to fat-tire mountain bikes.
- Heavy-duty steel construction with rust-resistant powder coating
- Fits 2-inch hitch receivers on SUVs, trucks, and crossovers
- Carries up to 4 bikes with 165 lb total capacity
- Tilt-away design for easy trunk and hatch access
- Foldable arms store flat when not in use
Heavy-Duty Steel Construction & Weather Protection
We built the DNYKER hitch bike rack frame from 1.5-inch steel tubing with reinforced joints at every stress point. The powder-coated finish resists rust, chips, and UV damage through years of highway miles and weather exposure.
Every weld passes our quality inspection before coating, ensuring the rack maintains structural integrity even when carrying maximum weight. The anti-wobble hitch lock eliminates the rattling and movement common with lighter racks, protecting both your bikes and your vehicle’s paint.
Vehicle Compatibility & Hitch Requirements
The DNYKER hitch bike rack requires a Class II, III, or IV hitch receiver with a 2-inch opening. Most SUVs, pickup trucks, crossovers, and minivans manufactured after 2010 come equipped with compatible receivers, though you should verify your specific vehicle before ordering.
Trailer Hitch Classes
Class II hitches support up to 3,500 pounds towing capacity and work perfectly with our rack’s 165-pound bike load. Class III and IV hitches offer even greater capacity for vehicles that tow trailers or campers in addition to carrying bikes.
Tilt-Away Access & Folding Storage
Our tilt-away mechanism lets you access your trunk, tailgate, or rear hatch without unloading bikes. Simply pull the release lever on the side of the rack, and the entire assembly tilts back 45 degrees while keeping bikes secure.
This feature proves essential during long trips when you need gear from the back but don’t want to remove bikes at every rest stop. The tilt mechanism locks in both upright and tilted positions with positive clicks you can feel and hear.
Complete Your Road Trip Setup
What people are saying
Common Questions About the DNYKER Hitch Bike Rack
No, our rack requires a 2-inch hitch receiver. If your vehicle has a 1.25-inch receiver, you can purchase a hitch adapter sleeve that converts 1.25-inch receivers to 2-inch, though we recommend verifying your vehicle’s weight capacity before adding an adapter.
Most compact SUVs and sedans with 1.25-inch receivers have lower weight ratings that may not safely support four bikes plus the rack weight.
Yes, the rack works with hitch extensions as long as the extension maintains the 2-inch receiver size and your vehicle’s hitch rating supports the combined weight of the extension, rack, and bikes.
Keep in mind that extensions increase the distance between your vehicle and bikes, which can affect ground clearance on steep driveways and may require wider turns in parking lots.
The DNYKER hitch bike rack cradles slide along the main rail to adjust spacing between bikes. We recommend placing bikes with the widest handlebars on the outer positions and alternating handlebar orientations—turn every other bike so handlebars face opposite directions.
You can adjust cradle spacing from 5 to 9 inches apart. Most riders find 7-inch spacing prevents handlebar contact while keeping the overall rack width manageable.
The rack sits low enough that most vehicles’ license plates and tail lights remain visible when the rack is empty or carrying bikes. However, state laws vary regarding license plate visibility during bike transport.
Some riders add a license plate bracket to the rack itself or use magnetic license plate holders that attach to the rack frame. We also offer an optional LED light bar that mounts to the rack and plugs into your vehicle’s trailer wiring.
Yes, you can leave the rack installed, and we designed the folding arms specifically for this purpose. When folded, the rack extends just 12 inches from your bumper and sits low enough that it won’t interfere with parking sensors or rear cameras on most vehicles.
The powder-coated finish protects against weather when left installed long-term. However, removing the rack when not in use improves fuel economy and prevents the hitch pin hole from corroding closed.
The DNYKER hitch bike rack supports 165 pounds total across all four positions. We recommend keeping individual bikes under 50 pounds for optimal stability and even weight distribution.
Most road bikes and mountain bikes weigh 25-35 pounds, so you’ll comfortably carry four bikes within the total weight limit. E-bikes often exceed 50 pounds each, so verify your e-bike weight before loading more than three on this rack.
No tools are required for basic installation. The rack slides into your hitch receiver, then you insert the included hitch pin and hand-tighten the anti-wobble bolt. The hex key for the anti-wobble bolt comes in the package, but it’s sized for hand use without a ratchet.
Removing the rack takes about 30 seconds—pull the hitch pin clip, slide out the pin, loosen the anti-wobble bolt, and pull the rack from your receiver.